Backs the SFP page. Read-only; polled every 1 s. One record with one array element per
SFP/SFP+ cage (SwOS: sfp cages reported by link.b; Lite: compiled in — css610*/css606: 2–3,
ftc11xg/ftc21/gpen21: 1). The response may additionally contain a nm key (port-name
overrides, SwOS).
| Label | SwOS id | Lite id | Type | Access | Notes |
|---|---|---|---|---|---|
| Vendor | vnd |
i01 |
str | RO | |
| Part Number | pnr |
i02 |
str | RO | |
| Revision | rev |
i03 |
str | RO | |
| Serial | ser |
i04 |
str | RO | |
| Date | dat |
i05 |
str | RO | manufacturing date as encoded in the module |
| Type | typ |
i06 |
str | RO | module type; the firmware abbreviates and the UI expands: &mmf → multi-mode fiber, &smf → single-mode fiber, &f → fiber. SwOS Lite uses {xx} numeric escapes instead |
| Temperature | tmp |
i08 |
int (32-bit SwOS / 8-bit-style Lite), °C | RO | -128 = not available |
| Voltage | vcc |
i09 |
uint, mV (scale 1000 → V) | RO | |
| Tx Bias | tbs |
i0a |
uint, mA | RO | |
| Tx Power | tpw |
i0b |
uint, 0.1 µW units, displayed as dBm (10·log10(wire/10⁴)) |
RO | |
| Rx Power | rpw |
i0c |
uint, 0.1 µW units, displayed as dBm | RO |
Notes:
i07is unused/not exposed in any analyzed SwOS Lite build.- On multi-cage devices every property is an array indexed by SFP cage (not by switch port); the cage-to-port mapping follows the port layout in models.md.
- gper14i has no SFP page.