Checkmk Client Monitoring Agent Script Suite

Proyek ini bertujuan untuk membangun sistem monitoring aset perusahaan menggunakan Checkmk secara terpusat, otomatis, dan seragam. Semua berkas konfigurasi, skrip instalasi (installer), dan skrip pemantauan (local checks) dikelola secara terpusat melalui repositori GitHub resmi: andin1st/scriptcmk.

📂 Struktur Repositori GitHub (`andin1st/scriptcmk`)

andin1st/scriptcmk/
├── .gitignore
├── README.md
├── docker-compose-checkmk.yml
├── linux/
│   ├── install.sh                  # Skrip Bootstrap Installer Linux Client (Multi-Distro)
│   ├── install_server_stack.sh     # Auto-Installer Server Stack (Docker Engine, Dockge, Checkmk Community)
│   └── local_checks/               # 10 Skrip Local Checks Linux
│       ├── battery_health.sh       # Deteksi Kesehatan Baterai (UPower & Sysfs Fallback)
│       ├── cpu_info.sh             # Metrik CPU (Model, Speed, Cores, Load, Temp)
│       ├── disk_nvme_health.sh     # Pemantau Kesehatan Disk (NVMe, SATA SSD TBW, SATA HDD)
│       ├── fan_health.sh           # Pemantau Kipas (RPM vs Suhu CPU)
│       ├── info_network.sh         # Performa & Bandwidth Jaringan (RX/TX Rate & IP)
│       ├── info_OS_office.sh       # Informasi OS & Deteksi Aplikasi Office (LibreOffice, Onlyoffice, WPS)
│       ├── ram_health.sh           # Uji RAM Asinkron via memtester (20% Free RAM)
│       ├── ram_usage.sh            # Penggunaan RAM Fisik Real-time (Used, Free, Total)
│       ├── remote_apps.sh          # Deteksi ID AnyDesk & RustDesk
│       └── storage_usage.sh        # Penggunaan Kapasitas Partisi Penyimpanan Fisik
└── windows/
    ├── install.ps1                 # Skrip Bootstrap Installer Windows Client (Mode Interaktif & CLI)
    └── local_checks/               # 10 Skrip Local Checks Windows
        ├── battery_health.ps1      # Deteksi Baterai Laptop vs PC Desktop
        ├── cpu_info.ps1            # Metrik CPU & Suhu Windows
        ├── disk_nvme_health.ps1    # Kesehatan NVMe, SSD, & HDD Windows
        ├── fan_health.ps1          # Pemantau Kipas Windows (Win32_Fan / CIM)
        ├── info_network.ps1        # Statistik Jaringan Windows (IP & Throughput)
        ├── info_OS_office.ps1      # Detail OS Windows & Deteksi MS Office / Onlyoffice
        ├── ram_health.ps1          # Uji RAM Asinkron Windows (20% Free RAM)
        ├── ram_usage.ps1           # Penggunaan RAM Fisik Windows
        ├── remote_apps.ps1         # Deteksi ID AnyDesk & RustDesk (--get-id)
        └── storage_usage.ps1       # Penggunaan Kapasitas Storage Windows

🚀 Panduan Deployment Cepat (One-Liner Bootstrap)

1. Server Stack (Docker, Dockge, Checkmk Community Edition)

Jalankan perintah satu baris ini pada terminal server Linux (Ubuntu/Debian/RHEL/Fedora) dengan hak akses root / sudo:

curl -fsSL https://raw.githubusercontent.com/andin1st/scriptcmk/main/linux/install_server_stack.sh | sudo bash

Info Akses Dashboard Server:

Dockge Manager: http://<IP_SERVER>:5001

Checkmk Web GUI: http://<IP_SERVER>:8080/cmk (User: cmkadmin | Pass: cmkadmin)

Agent Registration Port: <IP_SERVER>:8000

2. Client Linux (Debian, Ubuntu, Fedora, RHEL, Rocky, Alma)

A. Mode Interaktif:

curl -sSfgL https://raw.githubusercontent.com/andin1st/scriptcmk/main/linux/install.sh | sudo bash

B. Mode Instan / Silent (Deployment Massal):

curl -sSfgL https://raw.githubusercontent.com/andin1st/scriptcmk/main/linux/install.sh | sudo bash -s -- \
  -s 192.168.1.100:8080 \
  -d cmk \
  -v 2.5.0p14-1 \
  -g andin1st/scriptcmk

3. Platform Windows

Jalankan perintah berikut melalui PowerShell (Administrator):

A. Mode Interaktif (3 Inputan Ringkas):

Set-ExecutionPolicy Bypass -Scope Process -Force; [System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072; iex ((New-Object System.Net.WebClient).DownloadString('https://raw.githubusercontent.com/andin1st/scriptcmk/main/windows/install.ps1'))

B. Mode Non-Interaktif / Fast CLI:

Set-ExecutionPolicy Bypass -Scope Process -Force; [System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072; iex "& { $(New-Object System.Net.WebClient).DownloadString('https://raw.githubusercontent.com/andin1st/scriptcmk/main/windows/install.ps1') } -s 192.168.1.100:8080 -d cmk -v 2.5.0p14-1"

🔐 Registrasi Sertifikat Keamanan Agen (mTLS Registration)

Pendaftaran sertifikat mTLS (Mutual Transport Layer Security) dilakukan satu kali (one-time registration) setelah instalasi agen untuk mengamankan jalur enkripsi antara agen dan server Checkmk.

Linux Host:

sudo cmk-agent-ctl register \
  --hostname <NAMA_HOST_CLIENT> \
  --server <IP_SERVER_CHECKMK>:8000 \
  --site cmk \
  --user cmkadmin

Windows Host (PowerShell Administrator):

$ctlPath = "C:\Program Files (x86)\checkmk\service\cmk-agent-ctl.exe"
if (-not (Test-Path $ctlPath)) { $ctlPath = "C:\Program Files\checkmk\service\cmk-agent-ctl.exe" }

& "$ctlPath" register `
  --hostname <NAMA_HOST_CLIENT> `
  --server <IP_SERVER_CHECKMK>:8000 `
  --site cmk `
  --user cmkadmin

📊 Detail 10 Skrip Pemantauan Lokal (Local Checks)

Seluruh output local check menggunakan placeholder data kinerja (-) serta pembatas visual Unicode Light Vertical Bar (❘) untuk menjamin keakuratan parsing data Checkmk.

1. `battery_health.sh` / `battery_health.ps1`

Fungsi: Mendeteksi secara dinamis baterai laptop (UPower / Sysfs / WMI) dan PC Desktop.
Format Output: 0 "Health_Battery" - Status Battery : Fully Charged ❘ Design Capacity : 40w/h ❘ Current Capacity : 36w/h ❘ Health : 90% ❘ Battery Level : 100%

2. `cpu_info.sh` / `cpu_info.ps1`

Fungsi: Membaca spesifikasi prosesor fisik, menghitung load %, kecepatan clock, dan sensor suhu CPU.
Format Output: 0 "CPU_Info" - Spesifikasi : Intel Core i3 13100 | Clock Speed : 3.4Ghz | Core/Thread : 4/8 | CPU Load : 12% | CPU Temperature: 48 Celcius

3. `disk_nvme_health.sh` / `disk_nvme_health.ps1`

Fungsi: Pemantau penyimpanan terpadu (NVMe, SATA SSD, HDD). Menghitung TBW berbasis algoritma heuristik LBA serta pelacakan bad sector HDD.
Format Output (SSD): 0 "Storage_Health_sda" - Status : OK ❘ Model: CS900 SSD 120GB (111.79 GB) ❘ Status: PASSED ❘ Temp: 26C ❘ Health: 100% ❘ Read: 4.8 TB ❘ Written: 5.2 TB ❘ Write/Day: 35.50 GB ❘ Est. Life: >10 Years

4. `fan_health.sh` / `fan_health.ps1`

Fungsi: Membandingkan kecepatan putaran kipas pendingin (fan RPM) terhadap suhu CPU.
Format Output: 0 "FAN_Health" - Status : OK | FAN Speed : 2319rpm | Remark: FAN Condition Good

5. `info_network.sh` / `info_network.ps1`

Fungsi: Melacak statistik performa jaringan, RX/TX Rate, serta IP Address aktif secara real-time.
Format Output: 0 "Info_Network_wlo1" in=122554432c|out=3586048c OK - IP Address: 192.168.43.33 | Total Download: 114.14 GB | Total Upload: 3.34 GB | RX Rate : 250.20 KB/s | TX Rate : 123.00 KB/s

6. `info_OS_office.sh` / `info_OS_office.ps1`

Fungsi: Menyajikan rincian distribusi OS, kernel, serta pendeteksian terintegrasi aplikasi office (LibreOffice, OnlyOffice, WPS, MS Office).
Format Output: 0 "Info_OS" - OK - OS: Ubuntu 24.04 LTS | Kernel: 6.8.0-40-generic ❘ Checked At: 2026-09-24 16:00:00

7. `ram_health.sh` / `ram_health.ps1`

Fungsi: Uji kesehatan memori RAM asinkron (alokasi dinamis 20% Free RAM) beserta pemetaan slot fisik RAM (SMBIOS/DMI).
Format Output: 0 "Health_RAM" - Status : OK ❘ Result: Passed ❘ Tested Size: 1638M ❘ Last Test: 2026-09-24 11:00 ❘ Used Slots: 2/2 (0 Empty) ❘ Active Modules: [8GiB,8GiB] ❘ Log: memtester passed successfully.

8. `ram_usage.sh` / `ram_usage.ps1`

Fungsi: Memantau persentase penggunaan memori fisik (RAM) real-time.
Format Output: 0 "RAM_Usage" - Status : OK ❘ Used: 45% ❘ Used Space: 3.60 GB ❘ Free: 4.40 GB ❘ Total: 8.00 GB

9. `remote_apps.sh` / `remote_apps.ps1`

Fungsi: Mengidentifikasi ID unik aplikasi remote support yang terpasang (AnyDesk & RustDesk).
Format Output: 0 "Remote_Apps" - Status : OK ❘ AnyDesk ID: 123456789 ❘ RustDesk ID: 987654321

10. `storage_usage.sh` / `storage_usage.ps1`

Fungsi: Memantau persentase kapasitas partisi penyimpanan fisik lokal (bebas virtual/tmpfs).
Format Output: 0 "Storage_Usage_root" - Status : OK ❘ Partition: / ❘ Used: 42% ❘ Free: 139.20 GB ❘ Total: 240.00 GB

📋 Matriks Standardisasi Threshold Keputusan

Checkmk menginterpretasikan status (OK / Warning / Critical) berdasarkan matriks keputusan baku berikut:

Parameter Monitoring	OK (0)	Warning (1)	Critical (2)	Keterangan / Sumber Data
Suhu CPU	`≤ 75°C`	`> 75°C` s.d `≤ 85°C`	`> 85°C`	Sensor ACPI / CPUTIN / Coretemp
FAN Speed	`> 1600 RPM` atau `0 RPM` (Jika Fanless/PC)	`< 1600 RPM` (Saat suhu tinggi)	Kipas macet / mati saat overheat	lm-sensors / WMI / CIM
Battery Health	`≥ 60%`	`40% - 59%`	`≤ 20%`	UPower / sysfs / WMI
SSD Health	`> 90%`	`81% - 90%`	`≤ 80%`	Remaining Life / TBW Wearout
HDD Bad Sector	0	Reallocated/Pending `> 0`	Reallocated `≥ 50`	SMART Reallocated Sector Count
RAM Usage	`< 85%`	`≥ 85%` s.d `< 95%`	`≥ 95%`	`/proc/meminfo` / Win32_OperatingSystem
RAM Health	Passed	-	Failed	Uji Alokasi Memori Dinamis (20% Free RAM)
Storage Usage	`< 85%`	`≥ 85%` s.d `< 95%`	`≥ 95%`	Partisi Penyimpanan Fisik Lokal
Aplikasi Remote	Terdeteksi ID	-	Tidak terpasang	AnyDesk CLI / RustDesk `--get-id`

Dokumen ini diperbarui secara berkala mengikuti pengembangan standardisasi infrastruktur monitoring IT.

Navigation Menu

Repository navigation

About

Repository files navigation

Checkmk Client Monitoring Agent Script Suite

📂 Struktur Repositori GitHub (`andin1st/scriptcmk`)

🚀 Panduan Deployment Cepat (One-Liner Bootstrap)

1. Server Stack (Docker, Dockge, Checkmk Community Edition)

2. Client Linux (Debian, Ubuntu, Fedora, RHEL, Rocky, Alma)

A. Mode Interaktif:

B. Mode Instan / Silent (Deployment Massal):

3. Platform Windows

A. Mode Interaktif (3 Inputan Ringkas):

B. Mode Non-Interaktif / Fast CLI:

🔐 Registrasi Sertifikat Keamanan Agen (mTLS Registration)

Linux Host:

Windows Host (PowerShell Administrator):

📊 Detail 10 Skrip Pemantauan Lokal (Local Checks)

1. `battery_health.sh` / `battery_health.ps1`

2. `cpu_info.sh` / `cpu_info.ps1`

3. `disk_nvme_health.sh` / `disk_nvme_health.ps1`

4. `fan_health.sh` / `fan_health.ps1`

5. `info_network.sh` / `info_network.ps1`

6. `info_OS_office.sh` / `info_OS_office.ps1`

7. `ram_health.sh` / `ram_health.ps1`

8. `ram_usage.sh` / `ram_usage.ps1`

9. `remote_apps.sh` / `remote_apps.ps1`

10. `storage_usage.sh` / `storage_usage.ps1`

📋 Matriks Standardisasi Threshold Keputusan

About

Releases

Packages

Contributors

Languages

Name		Name	Last commit message	Last commit date
linux		linux
windows		windows
README.md		README.md
docker-compose-checkmk.yml		docker-compose-checkmk.yml
gitignore		gitignore

Latest commit

History

Folders and files

Repository files navigation

Checkmk Client Monitoring Agent Script Suite

📂 Struktur Repositori GitHub (andin1st/scriptcmk)

🚀 Panduan Deployment Cepat (One-Liner Bootstrap)

1. Server Stack (Docker, Dockge, Checkmk Community Edition)

2. Client Linux (Debian, Ubuntu, Fedora, RHEL, Rocky, Alma)

A. Mode Interaktif:

B. Mode Instan / Silent (Deployment Massal):

3. Platform Windows

A. Mode Interaktif (3 Inputan Ringkas):

B. Mode Non-Interaktif / Fast CLI:

🔐 Registrasi Sertifikat Keamanan Agen (mTLS Registration)

Linux Host:

Windows Host (PowerShell Administrator):

📊 Detail 10 Skrip Pemantauan Lokal (Local Checks)

1. battery_health.sh / battery_health.ps1

2. cpu_info.sh / cpu_info.ps1

3. disk_nvme_health.sh / disk_nvme_health.ps1

4. fan_health.sh / fan_health.ps1

5. info_network.sh / info_network.ps1

6. info_OS_office.sh / info_OS_office.ps1

7. ram_health.sh / ram_health.ps1

8. ram_usage.sh / ram_usage.ps1

9. remote_apps.sh / remote_apps.ps1

10. storage_usage.sh / storage_usage.ps1

📋 Matriks Standardisasi Threshold Keputusan

About

Resources

Stars

Watchers

Forks

Releases

Packages

Contributors

Languages

📂 Struktur Repositori GitHub (`andin1st/scriptcmk`)

1. `battery_health.sh` / `battery_health.ps1`

2. `cpu_info.sh` / `cpu_info.ps1`

3. `disk_nvme_health.sh` / `disk_nvme_health.ps1`

4. `fan_health.sh` / `fan_health.ps1`

5. `info_network.sh` / `info_network.ps1`

6. `info_OS_office.sh` / `info_OS_office.ps1`

7. `ram_health.sh` / `ram_health.ps1`

8. `ram_usage.sh` / `ram_usage.ps1`

9. `remote_apps.sh` / `remote_apps.ps1`

10. `storage_usage.sh` / `storage_usage.ps1`